ResponseCard RF Accessibility clicker with Braille and vibration confirmation is perfect for participants with disabilities and works seamlessly with TurningPoint assessment software.

ResponseCard RF-A

Turning Technologies is committed to serving the disabled community. Our dedicated team is currently developing new, accessible response solutions that will be usable by students with disabilities. We regularly hold usability and accessibility testing sessions to understand the needs of all of our customers and how our products can be enhanced accordingly.

Designed for the visually impaired, the ResponseCard RF Accessibility (RF-A) clicker contains all the features and functionality of ResponseCard RF, but with Braille characters adjacent to the corresponding buttons. In addition, ResponseCard RF-A includes a vibration motor that pulses when various actions occur. ResponseCard RF-A is compatible with TurningPoint assessment software.

ResponseCard RF-A Specs

Size & Weight
  • Height: 3.3 inches (83.8 mm)
  • Width: 2.1 inches (53.3 mm)
  • Depth: 0.3 inches (7.6 mm)
  • Weight: 1.0 ounce (28.4 grams)*
Input Capabilities
  • 12 key (1/A - 10/J, Ch/Channel, ?).
  • Answer Key - answer transmitted automatically.
  • Programmable - manually enter ID number other than factory default.
  • Use ResponseCard Programmer to easily change and verify ID.
Vibration Codes
Power Up Long Pulse (2 seconds)
Polling Open - Successful Response Long Pulse (1 second)
Polling Open - Valid Response Long Pulse (2 seconds)
Polling Open - Invalid Response 3 Short Pulses (0.5 second each)
Polling Closed/Invalid Answer Type Short Pulse (0.25 second)
Change Channel - Success Short Pulse when GO is pressed (0.5 second) Long Pulse after successful change (1 second)
Change Channel - Invalid 3 Short Pulses (0.5 second each)
Change Channel - 5 second timeout 3 Short Pulses (0.5 second each)
Receiver Not Present 10 second timeout followed by 3 Short Pulses (0.5 second each)
Firmware version Major version - X Long Pulse(s) (2 seconds)
Minor version - Y Short Pulse(s) (0.5 second)
For example, version 1.1 would be one Long Pulse, followed by one Short Pulse
Manual Unit ID Change 2 Long Pulses (approximately 1 second each)
Unit ID Change via Programmer 5 Short Pulses (0.5 second each)
Battery & Power
  • Powered by two coin cell CR2032 (3.0V) Lithium Batteries
  • Always in deep sleep mode - only uses power when a button is pressed
User Identification
  • Select a channel in less than 5 seconds, indicating session choice
  • Select a channel anytime - even when a session is underway
  • Channel selection is stored in nonvolatile memory
  • Channel selection is preserved until changed by participant
RF Technology
  • Available Channels: Up to 82 sessions can be running at one time in close proximity without interference.
  • Fully FCC, CE and Industry Canada certified.
  • Will not interfere with other technologies.
  • 200 foot range (400 ft. coverage)

*Weight is calculated with the addition of two coin cell CR2032 (3.0V) lithium batteries

View Hardware Warranty